This is especially true when high protection classes, robustness, use at high temperatures or special interfaces and connections for the greatest possible safety are required.

The intelligent combination of powerful industrial networks with the IO-Link communication standard enables the reliable and flexible exchange of information in a wide range of applications.

Balluff thus enables you to optimally network your network components and provides an important building block for the industrial automation of your company.

For unique identification and immediate traceability, a data carrier (RFID transponder) is attached to the object to be identified, which acts as a memory. The data is transmitted between the RFID transponder and the read/write head (reader) and passed on to the controller via the evaluation unit or an IO-Link network module. Our RFID solutions can be operated with almost any common controller and the evaluation units support all frequency ranges. And that is exactly what is special about RFID - the contactless exchange of information between RFID transponder and reader.

Canaan's Tech-Support department can provide project detection in industirial and building automation and support our customer applicating in industirial workplace

World’s Smallest of Its Kind. 24.2 mm in length only (with brushless DC motor) Transferring from just a few milliliters to up to 500 ml/min at a constantly.

The FL 10 can operate for more than 10,000 hours and is waterproof and dust proofed by IP 65 to handle the most demanding work.

Function

On an ELGUIDER pivoting frame system, the web changes direction four times, each time by 90°. The system is based on a pivoting frame with two path rollers. The imaginary pivot point is located on the infeed plane. Lateral web corrections can only be achieved by pivoting around this pivot point. The prerequisite here is always sufficient tension for traction bet­ween the web and the guide roller.

Area of use

Thanks to optimized exploitation of the elasticity ranges, the pivoting frame is particularly suited to use even in really tight spaces.

Application

Function

Based on ultrasound technology, the basis weight of a running web is accurately determined online and contactlessly. The detection of the basis weight is performed either with the aid of a traversing sensor head or, alternatively, with fixed sensor heads across the entire width of the web for 100% profile measurement. In addition, the thickness can also be calculated by entering the material-specific density.

Area of use

ELTIM basis weight measurement systems are used predominantly in flat extrusion and coating systems.

Application

Precision in every shape and size

Do you need tailor-made pinions and racks for a special application in your industry? We would be happy to hear from you! Besides the wide selection of designs and qualities in our portfolio, we can also produce solutions to our customers' specifications at any time upon request.

FlowMotion in any direction

Handling weights from just a few kilos up to several tons, our linear axes are indispensable for linear movements where dynamics, efficiency, and low noise levels are key. Thanks to Güdel's modular system, our components can be easily combined as and when required to form single-axis, multiple-axis, and rotary modules.

Precise ratios for more flow and power

Whether it is angular drives or large torques: with our wide range of solutions for angle gearboxes, planetary gearboxes and drive units, we offer you maximum flexibility in your choice of power transmission. They are available in various sizes and can be combined in many different ways.

Furthermore, all Güdel units are also very suitable for use with other components to create dynamic power chains. We recommend our perfectly matched function packages for this – consisting of gears, racks and pinions.

Han-Modular® allows you to combine individual modules with different signal, data and power functions into a single standard industrial size connector. These connectors are rugged and can withstand harsh industrial environments.

har-flex® small, flexible and robust connectors offer attractive solutions for miniaturization in Industry 4.0 applications.

Ensenso currently offers four major series. The Ensenso N, Ensenso C, and Ensenso X series are based on the unique "projected texture stereo vision" technology. Each 3D camera in these series integrates two CMOS sensors and a projector that projects high-contrast textures onto the surface of objects. The Ensenso S series, on the other hand, utilizes a laser light combined with AI technology. This design achieves cost reduction and a lightweight form factor without requiring extremely high precision data.

Push-X – the new X-perience of wiring

A new concept in tool-free conductor connection: Push-X can accommodate all types of conductors with direct wiring tool-free and without significant force.

A pretensioned contact spring lies at the heart of this new technology. This principle enables the connection of rigid and flexible conductors with or without ferrules. Even the smallest flexible conductors trigger the connection. As with Push-in technology, connected conductors can be released by pressing the orange push button. At the same time the conductor is released, the contact spring is preloaded for a new wiring operation.

Industrial connectors from the HEAVYCON complete series protect your interfaces and ensure the reliable transmission of power, data, and signals even under the harshest conditions. The industrial connectors are resistant to dirt, water, vibrations, and high levels of mechanical strain. The heavy-duty connectors have a seal rating of up to IP69K.

The Flying Spot Scanner (FSS) 310 uniquely combines OCT with wide field-of-view scanning, and solves the problem that ultra-precise measuring systems are normally very slow and extremely expensive.

The FSS 310 has a flexible, fast-moving measurement point within the field of view which enables a ROI inspection  in ultra-short cycle times – without compromising accuracy. This device measures the total thickness variation (TTV), bow, warp and voids of an entire 12-inch wafer in a single scan.

Broad applicability -

In combination with devices from the CHR 2 IT family, the fully variable scan trajectories programmable by the user enable thickness and distance measurement of Si, doped Si, GaAs and SiC wafers. The FSS not only measures bow, warp and TTV but also detects voids on wafers, performs thickness measurements of semiconductor component coatings (e.g. partial foliation of wafers) as well as measuring the bow of individual dies on wafers prior to further processing.

The chromatic confocal line sensor CHRocodile CLS 2 is the ideal tool for precise 3D inline quality control in harsh industrial environments. It is highly suitable for applications in consumer electronics and semiconductor industries, such as inspecting the topography of smartphone housings or conductor chips, as well as measuring and inspecting micro bumps or detecting die cracks.

The Laser Welding Monitor (LWM) detects process

irregularities in a fully automated production environment and is the tool of choice, to meet your quality requirements. Every single laser weld is monitored evaluated and documented to ensure 100% traceability and transparency in series production.

DETECTION OF TYPICAL WELDING DEFECTS:

For example:

• Change of laser power and focus position

• Gap between upper and lower sheet

• Spatter and pores created during the laser process

• Contaminated components

The LWM can be adapted to almost any customer application, facility and infrastructure. The sensor‘s high dynamic range enables monitoring from high power welding applications to micro welding applications - at the push of a button using the same hardware. It captures data from

any type of process, whether it‘s deep penetration or heat conduction welding applications, welding with or without keyhole, or a combination of both CW or pulse laser are available as modes.

In addition, the LWM 4.0 sensor is available for infrared, green or blue laser sources. The photodiodes are adapted to the laser source.

The lightweight ZEISS T-SCAN hawk 2 with GOM Inspect

The 3D scanner T-SCAN hawk is portable, precise and made to make a difference. In combination with the pre-installed GOM Inspect software, it’s a powerful solution that assists you along every step of your task. From capturing high quality 3D data to delivering high quality results: It’s made to simplify processes. It’s made for you.

ZEISS ScanCobot is a mobile measuring station with a collaborative robot, a motorized rotation table and powerful software. It is especially suited for efficient quality control of small and medium-sized parts made of plastic, metal or cast iron. The system can be used during the preproduction phase such as design and prototyping and during the market launch. In a short measuring time, the optical 3D scanner ATOS Q captures quality information at a high level of detail, providing a reliable basis for easy interpretation. To measure a part completely, the sensor must face the part from different directions. The ZEISS ScanCobot uses a collaborative robot to perform this normally manual work process. Combined with the motorized rotation table, the robot can move along the sensor positions very quickly one by one. Efficient scanning and subsequent automatic inspection speed up quality control processes.

The axial encoder system PAM7942 consists of a 360-degree absolute encoder and a two-track axial magnetic disc which are assembled in a packaged which can integrate directly.

This system offers a true-power-on position measurement system with a resolution up to 24 bits.

Due to its axial magnetic disc and the compact, very flat sensor module the system is ideally suited for use in robot joints or flat motors.

The incremental sensor kit PAR7001AxA-KH consists of the module EBR7001AxA-KH and the magnetic pole ring MWR0032KCC-KH. The pole ring has a mechanical nose which is necessary for the reference pulse.

The sensor module contains an Anisotropic MagnetoRe­sistive sensor AL796 and a Giant Magneto Resistive (GMR) sensor GF705 for the reference signal.

• TMR sensors inside
• AC & DC from 100 to 1000A nominal current measurement
• High accuracy
• Low temperature drift

SIMPLY PUSH PERFORMANCE TO THE TOP WITH TOPJOB® S RAIL-MOUNT TERMINAL BLOCKS

Save time and avoid errors in realizing your switchgear: Thanks to reliable push-in connection technology and 3 ways to terminate wires - Levers, Push-buttons and Operation slots.

Our rail-mount terminal blocks are incredibly quick and easy to use, both in the workshop and the field.

Maximum security for your materials management

Consumables such as personal protective equipment, tools or machines with irregular, unpredictable requirements play a significant role in your company's cost and efficiency balance sheet. It is not so much the cost of the materials that matter, but rather their procurement or a shortage of operating supplies that cost you and your employees a lot of time and money.

In addition to our system solutions for production material, Würth offers a holistic, modular concept for auxiliary and operating materials. With the vending machines, we take care of the delivery, storage and stocking up to the fully automatic replenishment of your auxiliary and operating materials. All processes are transparent and completely traceable. Due to the existing authorisation concept, the withdrawal permissions can be assigned individually per user. This prevents unwanted withdrawals. Furthermore, you profit from the advantage that your auxiliary and operating materials are available 24 hours a day. As a result, you are no longer dependent on the opening hours of your material issue department.

Supplying and Managing Fasteners, C-Parts, and Assembly Components

Fasteners and assembly components are the small parts in a large machine. Without them the machine falls apart. However, having the right parts at the right time will keep the machine running smoothly and continuously. This is much the same as a production line; having the right C-Parts, at the right time will keep your production line running smoothly.

Würth has supplied Fasteners to OEMs since our founding in 1945. We have customizable inventory management systems that are designed to your specific needs to ensure you always have fasteners in stock. Less stress on you means more time on value-added materials and other important business activities.

Minimum Cost, Maximum Efficiency

A major factor in the success of a business is having the appropriate maintenance, repair, operating (MRO) and industrial supplies to assist in keeping your facility in safe and top working condition.

Würth has a wide range of production consumable and related equipment for manufacturing, construction, general contracting, and various other industries. From cleaners to general tool kits, we help to order, deliver, and store those items making them available at their designated locations with an MRO program designed for your facility.