Condition monitoring systems and their components contribute to the efficient and trouble-free operation of machines and plants in industry. Disruptions in the production process due to unplanned downtimes can be prevented by using sensors. Monitoring devices such as vibration, temperature, pressure and level sensors, provide data on the condition of a plant. When processed, this data provides information for the upkeep of machines and thus enables preventative and predictive maintenance. These condition monitoring systems allow changes, such as wear on individual components, to be detected more quickly and machine maintenance to be better coordinated.

To reliably control and monitor your machines and systems, you need professional industrial communication and network technology. The requirements for industrial networks are extensive and diverse. The ever-increasing volume of data and complex communication require powerful and reliable components that are capable of transporting information across all levels.

This is especially true when high protection classes, robustness, use at high temperatures or special interfaces and connections for the greatest possible safety are required.

The intelligent combination of powerful industrial networks with the IO-Link communication standard enables the reliable and flexible exchange of information in a wide range of applications.

Balluff thus enables you to optimally network your network components and provides an important building block for the industrial automation of your company.

Our identification solutions BIS, offer you the key technology to implement essential requirements of modern manufacturing. With RFID technology, objects and products can be clearly assigned in the company and traced at any time. RFID systems are used to make all production steps transparent and traceable and are therefore an essential component for implementing the requirements of modern production and always keeping an eye on all data.

For unique identification and immediate traceability, a data carrier (RFID transponder) is attached to the object to be identified, which acts as a memory. The data is transmitted between the RFID transponder and the read/write head (reader) and passed on to the controller via the evaluation unit or an IO-Link network module. Our RFID solutions can be operated with almost any common controller and the evaluation units support all frequency ranges. And that is exactly what is special about RFID - the contactless exchange of information between RFID transponder and reader.

Dependable sensor technology is essential for low-manpower, in-process reliability in production. In response to this, BLUM is already in a position to fulfil the demands that Industry 4.0 networked production will be making. The future-oriented measuring systems open up revolutionary options for production processes because of the
data pool generated through thousands of measuring values per second.

Fast

• Highly dynamic measurement of all tool parameters
• Thousands of measuring values of all tool cutting edges per second
• Up to 60% less measuring and checking time
• Dynamic adjustment of the measuring speed according to the nominal tool rpm

Precise

• Digilog calibration with integrated run-out monitoring
• Evaluation of a data stream
• Consistently good part precision through process integrated temperature compensation
• Recognition of changes in geometry such as tool cutting edge wear

Reliable

• Reliable measurement even with coolant influence

TC50/TC52 Touch Probe

Universal High-Speed touch probe with multidirectional measuring mechanism

• Detection of workpiece position
• Correction of workpiece orientation
• Thermal compensation of the machine tool
• Contour measurement

Your benefit:

• Measuring speed up to 3 m/min
• Precise, non-lobing touch characteristics
• Precise measurement even with coolant
• Proven and robust design

Z-Nano Tool Setting Probe
Robust and extremely precise — tool setting probe with linear working principle for monitoring the smallest tools in micro-machining applications

Your benefit:

• Tool breakage detection
• Tool length measurement
• Machine axes compensation
• Temperature compensation
• Extremely fast tool breakage detection
• No subsequent damage due to tool breakage
• Fast ROI
• No-wear, optoelectronic measuring mechanism
• Compact and robust design

ZEISS Coordinate Measuring Machines (CMMs) excel in precision and versatility, catering to diverse industrial measurement needs, essential in sectors like aerospace, automotive, and precision engineering. Known for their extreme accuracy, these CMMs detect even the minutest deviations, a crucial factor in quality control. They feature advanced software integration, such as ZEISS CALYPSO, which simplifies measurement planning and enhances efficiency while reducing errors. The range of CMMs is designed to handle various object sizes and types, from intricate components to large industrial parts. Their durability and reliability make them a valuable long-term investment for quality assurance departments. ZEISS CMMs offer customization and scalability with different probe heads, sensors, and software packages, adapting to specific industry needs. This adaptability leads to enhanced quality control processes, resulting in fewer defects, reduced waste, and increased customer satisfaction. User-friendly in design, these CMMs require minimal training and integrate easily into existing workflows. Additionally, ZEISS’s global support and service network provide comprehensive training, maintenance, and calibration services, maximizing the investment in their CMM products.

ZEISS CT machines, renowned for their precision and advanced technology, offer significant benefits across various industries, including manufacturing, automotive, and aerospace. These machines feature high-resolution X-ray imaging and sophisticated scanning technology, enabling accurate 3D modeling of complex structures through non-destructive testing. They provide metrology-grade measurements crucial for quality assurance, enhancing product integrity and safety. Integrated with user-friendly software for data analysis and visualization, ZEISS CT machines streamline the inspection process, making them time and cost-efficient. This efficiency is vital in fast-paced R&D environments, accelerating product development while ensuring reliability. Additionally, their versatility makes them suitable for a wide range of materials and component sizes. Supported by ZEISS's comprehensive training and support network, these CT machines are invaluable tools for industries requiring detailed internal examination and precision quality control, contributing significantly to product safety and reliability.

ZEISS Industrial Microscopes excel in precision and versatility, offering significant advantages for materials science, quality control, and industrial R&D. Key features include high-resolution imaging with advanced optics for clear, detailed observations, and integrated technologies like Axiocam cameras and LED illumination for superior image quality. Their modular design allows customization to meet specific needs, and ergonomic considerations ensure user comfort. The microscopes are equipped with powerful software like ZEN core for advanced image processing and analysis.

The benefits of these microscopes are manifold. They ensure accuracy and precision in measurements, vital for quality assurance. Their versatility makes them suitable across diverse applications, enhancing productivity through efficient data analysis workflows. User-friendly design accommodates all skill levels, and their scalability ensures long-term utility. Additionally, ZEISS's global support and service network provides comprehensive assistance, maximizing the microscopes' value in various industrial settings.

The CTS safety switch is the latest development in this field. Measuring only 135 by 31 by 31 mm and featuring a locking force up to 3,900 N, plus diverse mounting options, it is versatile enough for almost any application. The CTS can be mounted in three directions to protect both hinged and sliding doors. A new, retrofittable escape release greatly expands the range of applications.

In combination with highly coded, transponder-based keys, the key adapter CKS2 forms a safe system that meets the highest safety requirements for machine and installation lockout and starting. Thanks to the integrated evaluation electronics, the compact CKS2 system can solve many tasks for you.

 

Simple operation

When the key is inserted into the key adapter, the data on the key are read and checked for validity. If the key is recognized as valid, the safety outputs switch. Keys are taught-in directly on the key adapter, without complex programming.

 

Absolute safety

Proven transponder technology and the use of keys with a high coding level provide absolute safety. The CKS2 system can be integrated into installations with the highest safety requirements, such as category 4 / PL e according to EN ISO 13849-1.

 

FlexFunction for versatile use

The CKS2 system is a FlexFunction device enabling various applications depending on the key version. As a lockout system, key transfer system or authorization system, the CKS2 system is the right choice wherever dangerous machine movements must be safely started or stopped independently of the existing safeguards. It provides a wide range of applications when combined with the proven EUCHNER safety switches or as a submodule for the innovative door locking system MGB2.

The MGB (Multifunctional Gate Box) is a unique interlocking or guard locking system for the protection of safety doors on machines and systems.

The MGB offers that little bit more: it is more than a safety switch, more than a bolt, and offers a lot more functionality!

A system that can grow with your needs.

Even the basic system comprising handle module and interlocking/ locking module includes numerous functions.

Whether interlocking, guard locking, escape release or other functions such as buttons for start/stop, emergency stop, etc. – The MGB meets all your requirements for safety-related applications.

And if your needs grow, the MGB system grows with them. Due to the sophisticated modular design, the interlocking/ locking module can quickly become a small operator panel.

Be certain of compliance with new standards.

Performance Level e in accordance with EN ISO 13849-1 or SIL3 in accordance with EN 62061 – even with the basic system you can comply with all these requirements.

Also the requirements of EN ISO 14119 for protection against tampering are met automatically, as each interlocking/locking module is permanently assigned to a handle module.

Oemeta is a century-old German company that develops and produces high-quality metal working fluids. Its customer base includes major well-known car manufacturers such as BMW and Volkswagen, as well as medical, aerospace and semiconductor equipment, and has been recommended and certified by major equipment manufacturers.

As a specialist provider of high-performance cooling lubricants, Oemeta conduct our business from the perspective of sustainability, in particular environmental protection, employee protection and resource conservation, and we are a responsible partner to manufacturing companies worldwide.

setral® develops and produces high-performance and special lubricants for industrial applications. Well-known customers worldwide benefit from our fifty years of experience. With partnerships in over 80 countries we are represented worldwide.

The use of the most modern laboratory facilities, excellently trained staff and a high-end production line make us an innovative and strong partner. Our broad product range of high-performance and special lubricants offers the answer to most questions in the field of lubrication technology.

The machine series perfectly combines the benefits of conventional tactile and optical coordinate measuring machines. The granite-base design with fixed bridge enables excellent specifications with the highest measuring dynamics. The ScopeCheck® FB offers the optimum combination of precision and measuring range and has compact installation dimensions and a low weight.

With the proven multi-ram concept, multi-sensor measurements are possible without restriction. Up to three independent sensor axes (rams) allow quick sensor changes and minimise the risk of collision.

The TomoScope® XS Plus enables the measurement of larger workpieces and small objects with high resolution or reduced measurement time. Complete workpiece volumes with almost any adjustable resolution in all coordinate axes (up to 60 billion voxels) are available as measurement results. Applications include 3D measurements of e.g. connectors, plastic housings and covers, 3D printed workpieces, packaging, PET bottles and preforms.

The LGuniversal cylindrical grinding machine, equipped with linear motor technology, features direct drive spindles and a natural granite bed for highest accuracy and thermal stability for precision grinding.

The machine can be equipped with a number of OD and ID direct-drive grinding spindles, combining conventional abrasives with CBN and/or Diamond grinding wheels, using conventional speeds or high speed grinding. Peel grinding as well as form grinding, i.e cam grinding, is available due to the availability of a standard, direct drive C-Axis work head spindle. The direct drive, infinite programmable B-Axis allows for fast tool change times, making it the ideal machine for high mix, small batch sizes or high volume production runs encountered in the automotive, aircraft, hydraulics, gear manufacturing, cutting tools, mold & die and various other industries, regardless of company size.

From high-performance motor spindles (with 30,000 min-1 and 120kW) to standard milling spindles (with 24,000min-1 and 60kW), we at GTW also manufacture high-performance turning -milling spindles with the smallest dimensions.

 

We develop excellent electric motors that meet every test requirement in the field of e-mobility. We were able to develop a new type of motor family-the RigBes. New bearing concepts and advanced cooling strategies enable temperatures in the motor elements to be kept below 120°C under all operating conditions. Bearing temperatures never exceed the 50°C mark, even at 28,000min-1.

 

The versatile 900 series direct drive rotary tables are particularly suitable for HSC milling, mill-turn machining, modern hobbing (power skiving) or even demanding grinding operations. This transforms a simple and cost-effective 3-axis milling center into a fully automatable, multi-functional 5-axis machine. The housing of the 900 DD series is fully sealed to IP 67 and even rotations of well over 2,000 rpm are no problem. A specially developed Fail Safe system brakes the spindle to 0 within a very short time (e.g. With an emergency stop or power failure) without damaging the rotary table.

 

Experience high-performance machining thanks to powRgrip®’s excellent runout, high vibration dampening and easy as well as secure handling. Enjoy the advantages for high speeds, difficult-to-handle work materials and generally demanding applications.

The clamping unit clamps the powRgrip® collet into the toolholder with a force of up to 90 kN. The pressure fit provided between the collet and toolholder creates a radial force, which is concentrated on the tool shank via the slotted collet and holds the tool safely and with a high degree of concentricity.

Burnishing is a process employed in the micro finishing of surfaces to obtain smooth and hardened surfaces with high load bearing capacity and good running properties, without machining.

Roughness after burnishing ≦Ra 0.2

Our range includes both manual and automatic machines. Our automatic machines can work in complete autonomy thanks to an integrated measuring station that makes it possible to correct both the final size and the geometry of the hole.

Our apparatuses are the ideal solution for achieving precision holes at an affordable cost. They can be easily installed on a machine tool such as a lathe, drilling or milling machine.

Our hones for blind or through bores are designed for very high precision boring. They make it possible to attain geometries lower than 0.001 mm as well as surfaces of Ra0.015.

The HAINBUCH SYSTEM allows you to clamp 1,000 different workpieces and gives you everything you need for complete machining.

You need only one basic clamping device – a chuck or a stationary chuck that remains on the machine. For O.D., I.D., jaw or magnetic clamping, or clamping between centers you then use adaptations – without having to accept any compromises.

The workpiece defines the adaptation and converts your basic clamping device for the particular application. This incredible solution reduces set-up time substantially, while increasing flexibility and making it possible to easily squeeze in short-term jobs.

HAINBUCH segmented mandrels use state-of-the-art clamping technology that is convincing, even in the most critical applications. The central element is the vulcanized segmented clamping bushing. Because conventional clamping bushings are made of spring steel and are only annealed to spring hardness, they are »soft« and they must »bend« to clamp the workpiece. HAINBUCH segmented bushings are made of case-hardened chromium-nickel-steel and have segments that are extremely hard and rigid. All contact surfaces are completely ground in one operation guaranteeing optimum concentricity.

Mandrels with hexagonal clamping geometry, the MAXXOS mandrels are the optimized version for round MANDO mandrels. Thanks to the hexagonal geometry, a previously unattained clamping force and rigidity with the best precision is now achieved for internal clamping. The robust and powerful clamping mandrel delivers first-class values in terms of dirt density. The force is transmitted by positive locking, in addition to optimum process reliability and long maintenance intervals.

Ideal for today's high paced manufacturing environment!

Convenient, that the HAINBUCH quick change-over systems fit on all your machines. Even better, that you can change your clamping devices in a matter of minutes, thus earning money quicker and allowing you to manufacture job-oriented. And, thanks to our unique technology, you will achieve a repeatability of ≤ 0.003 mm on the interface.

However, our high-speed solutions have even more to offer: As you will experience shorter machine downtimes along with reduced processing and throughput times, your quick change-over systems will pay off in no time. Better yet, you will not have to compromise on quality, rigidity or precision.

Select the spindle connection and the clamping device that is right for you from our extensive assortment. We can even accommodate you if you are already using clamping devices made by other manufacturers. We will simply adapt them to our interface.

Compact hydraulic power packs are a type of hydraulic power pack. They are characterised by a highly compact design, since the motor shaft of the electric motor also acts as the pump shaft. Compact power packs are used to supply hydraulic fluid in hydraulic circuit systems.

The hydraulic pumps from HAWE Hydraulik are characterised by their compact and robust design. They are suitable for demanding applications up to 700 bar.
The range includes single pumps (radial piston pumps, axial piston pumps, air-driven hydraulic pumps, hand pumps) and hydraulic power packs.

The range includes directional spool valves, directional seated valves, pressure control valves, flow valves and check valves – either as individual components or combined in valve banks.

Energy chains (also called energy supply chains, e-chains) are mechanical machine elements. They are used to guide and protect energy, data and signals that have to withstand the most diverse environmental influences. The decisive fact about cable guides is the symbiosis of the components moving against each other. They include cables, hoses, interior separation elements, strain relief devices and guide troughs.

Thanks to energy chains, downtime is avoided wherever energy in the form of electricity, gas, air or fluids is supplied to moving loads.

The harnessing of cables according to your individual specifications or industrial standards is one of the core competencies of igus®.

When harnessing cables, the choice of components is also very important for subsequent quality. So we use the highly flexible igus® chainflex® cables in combination with well-known connector manufacturers, e.g. Harting, Binder, TE Intercontec, Yamaichi and many others. On request, we can also produce harnessed cables individually according to your wishes and application requirements (no minimum order quantity).

igus® lubrication-free linear systems travel in dry operation, which makes them maintenance-free and resistant to external influences. In addition, they run especially quietly thanks to the materials used and the special design involved. Customer can easily calculate the service life online in just a few steps.

The drylin® drive technology offers lubrication-free linear axes that are driven with a lead screw, toothed belt or gear rack. Electric and manual drives via hand wheels or electric motors are possible. In addition to numerous standard versions, customer can also find linear drives for special needs at igus®, such as lightweight and ready-to-install linear axes made of plastic or solid stainless steel linear modules for heavy loads.

CytroPac, Compact-size hydraulic power units & completely equipped and integrated. Today, the latest power units already boost efficiency in production with their energy-efficient operation, innovative design and intelligent connectivity.

Cytropac - Integrated Hydraulic power Unit, including an economical Sytronix drive, completely wired frequency converter and Industry 4.0 compatibility. With powerful up to 4 KW and pressure of 240 bar in 50 percent less installation space. Furthermore, CytroPac also complies with the EU Ecodesign Directive 2009/125/EC. Simply connect power, fluid and interface and go.

Explore the world of hydraulics via app

Setting hydraulic valves manually with a multimeter and wrench? That was yesterday. Today, all you need is a mobile phone app and a Bluetooth connection to start using Rexroth hydraulic components with the new digital on-board electronics, adjust them during operation and carry out diagnostic tests. This not only saves machine manufacturers time and money – for users it means greater flexibility for process changes and improved availability.

CytroForce (Self-Contained Actuator)

The out-of-the-box solution consisting of flow-optimized standard modules sets new benchmarks in terms of power density, energy efficiency and quiet operations. The solution allows even machine manufacturers with very little hydraulics experience to benefit from previously unknown application possibilities and minimal total costs from engineering to maintenance.

Key technical data:

• Nominal forces up to 1100 kN
• Maximum travel velocity 800 mm/s
• Maximum traveling distance 1000 mm

CytroMotion (Compact self-contained actuator)

CytroMotion raises the efficiency of hydraulic linear axes in the power class up to 6.2 kW to a new level. The simple engineering and fast commissioning with purely electrical control also inspire designers and technicians without hydraulic experience. Users appreciate the clear product selection, maintenance-free operation and high productivity with maximum energy efficiency.

Key technical data:

• Nominal power up to 6.2 kW
• Maximum pushing force 275 kN
• 740 mm/s maximum speed
• 1000 mm maximum stroke length

High-performance dielectrics of the IonoPlus series are suitable for all requirements during die-sinking. The almost odorless and green dielectric fulfills all requirements from finishing to roughing machining. Using a sophisticated production method, the synthetic product is manufactured in a special blending process. The IonoPlus series does not fall under the operational safety regulations and can be easily filtered with all common filtration systems. Leading machine manufacturers have adapted their generator technology to IonoPlus. IonoPlus IME-MH is predestined as an all-rounder in the product range and offers optimized flushing properties, maximum dielectric strength and a number of other unique advantages.

Grinding oils in our SintoGrind series are high-performance cooling lubricants made of synthetic base oils, free of chlorine and heavy metals, for high-speed grinding processes that require extreme precision and optimum cooling.

SintoGrind products are free of aromatics and contain additives with a high pressure absorption capacity. When SintoGrind is used, the selected additives ensure clean and abrasive grinding wheels. The applied tangential force is effectively reduced and, together with surfactants, superb cooling, wetting and lubricating effectiveness is achieved. The extraction of cobalt during tungsten carbide grinding is minimized due to the special composition.

SintoGrind grinding oils have low rates of evaporation and misting, are extremely low foaming and have excellent rinsing and cooling capacity due to their low viscosity. Furthermore, they are absolutely shear-resistant and extremely resistant to ageing. Fluid life of more than 10 years is often possible and with optimal filtration it can be used longer without any problems.

DiaMond Superfinishoil are water-bright, odorless synthetic oils of the highest degree of purity and nearly free of aromatic compounds, which in combination with polar active ingredients and skin-protecting additives ensure optimum surface quality with maximum occupational safety. Used in Superfinish or fine grinding machines, DiaMond Superfinishoil is ideal for use with metal, ceramic and resin bonded grinding and lapping wheels as well as CBN and diamond grinding wheels.

DiaMond Superfinishoil is recommended by leading machine manufacturers such as Hauser, CH-Biel (Release No.: 230722).

The grinding wheel service life is extended five times which allows for maximum repeatability. The oils have a high rinsing capacity with optimum filterability of common filter layers, increase the cutting performance and prevent heat cracks thanks to the good cooling properties.

1.三軸空氣軸承。

2.三軸及量測平台均為花崗岩材質,溫度係數相同,幾何結構穩定,可保持長時間之高幾何精度,耐用性佳。

3.X、Z軸均以花崗岩中空近方形設計,重量輕,剛性佳,幾何運動變形小。

4.各主要零組件精度要求至0級或00級,幾何精度高,不需補償。

5.Y軸與量測平台一體成形。

1.       特殊蜂巢式鋼珠軸承，精度與耐用度極高。

2.       X軸防撞設計，可完全保護機台與工件。

3.       即時圖形化顯示量測結果。

4.       3D立體圖形顯示及報告輸出。

5.       CNC量測程式化，教導式軟體。

1.     X軸的定位速度可達200mm/s,比市場上常見機種的X軸快5倍。

2.     創新的工件夾持治具板,治具板與Y軸調整的組合省去了額外安裝XY工作台的需求。

3.     高動態的智慧型測頭系統,透過晶片辨識。

4.     磁性探頭臂無需使用工具,即可更換探頭臂。

5.       可擴充粗糙度評估。

ROTEX® GS backlash-free servo couplings

Low-cost, easy, and quick assembly!

1. small dimensions and low mass moments.
2. applied wherever drives need to be positioned precisely.
3. Despite its vibration-damping properties the coupling is torsionally stiff.
4. allow for simultaneous compensation of radial, axial, and angular displacements.
5. different size and with/without feather keyway are available.

The new MONITEX® BT is a precise tool for daily measuring tasks in test bench technology. With the help of the apps(Android/iOS) or the PC software, torque, and speed data can be displayed and saved in a matter of seconds.

1. cost-saving- thanks to new integrated design, cost down no longer a dream but a fact.
2. Inaccuracy 0.2%! with wireless Bluetooth connection, one device gets everything!
3. SPACER-SAVING- the new measurement coupling can be integrated into the drive in a few simple steps in contrast to classical torque measurement.
4. Error alert- immediat

All-steel couplings with laminae sets made of high-strength and stainless spring steel.

The high-strength and special dowel screws are reciprocally screwed to hubs and spacer allowing for a combination of friction and positive-locking fit. In this way, our laminae coupling ensures high power density with simultaneous ease of displacement and low restoring forces.

hyperMILL is a modular CAM software solution that is being developed by Open Mind Technologies AG based in Weßling near Munich.  hyperMILL  enables CAM programmers to create NC programs. 

hyperMILL combines 2.5D, 3D (e.g. roughing),5-axis milling, 5-axis simultaneous machining as well as milling turning and machining such as high-speed cutting (HSC) and high-performance cutting (HPC) under one user interface. The software also includes special applications for milling impellers, blisks , turbine blades , mold channels and tire molds as well as numerous automation options. 

With hyperCAD-S, we are developing its own CAD system for the requirements of CAM programmers. hyperMILL is available as a direct integration for Solidworks and Autodesk Inventor. The integrated versions are certified by Dassault Systems and Autodesk.

hyperMILL is used worldwide in various industries, including tool, mold and mechanical engineering as well as in the automotive, medical technology, energy supply, aerospace, and aviation.

The lightweight ZEISS T-SCAN hawk 2 with GOM Inspect

The 3D scanner T-SCAN hawk is portable, precise and made to make a difference. In combination with the pre-installed GOM Inspect software, it’s a powerful solution that assists you along every step of your task. From capturing high quality 3D data to delivering high quality results: It’s made to simplify processes. It’s made for you.

A small scanner for precise meshes and big ideas

ZEISS Scan 1 is here to open up new possibilities. Industrial standards such as GOM fringe projection technology and Blue Light Technology deliver the foundation for detailed and accurate 3D meshes. Meanwhile, the integrated software GOM Inspect helps you apply the mesh to any project you want: 3D printing, reverse engineering or part inspection. So, go ahead and start something big. ZEISS Scan 1 features a compact shape and robust design filled with advanced technologies. From GOM’s Blue Light Technology to the stereo camera principle, this sensor is built to deliver 3D data with high precision.

The ZEISS METROTOM is an industrial computed tomography system for measuring and inspecting complete components made of plastic or light metal. With traditional measuring technology, hidden structures can only be inspected after the time- and cost-consuming process of destroying the component layer-by-layer.

With ZEISS METROTOM computed tomography system, numerous component characteristics are scanned in one run. The resulting measurements are precise and traceable. Unlike contact measuring methods, ZEISS METROTOM is significantly faster when capturing numerous measuring points.

1. Significantly reduced costs due to reduced set-up times
2. Highest process reliability and repeat accuracy < 0.005 mm.
3. Proofline = fully sealed = low maintenance
4. Maximum pull-in forces until 45 KN (APS 190) by turbo function
5. Stainless steel or hardened material

1. The IMG self-centering vices can be easily transformed into fixed vices or double clamping vices
2. IMG vices clamp force up to 50 kN
3. Ideal for OP 10 and op 20
4. Highly precise self-centering clamping with maximum repeatability
5. Compact design for better accessibility and very large drainage
6. Slots jaws with sintergrip clamping inserts for minimum workpiece clamping depth without pre-machining

1. Easy exchange for manual chucks
2. For machines without hydraulic cylinder
3. Extra large through hole
4. Easy installation with no additional adapters required
5. End machining of long pipe

"500kg to 450.000kg capacity. Especially in wind energy, textile slings are for gently lifting.

The super compact MagumX round sling made from high-strength fibres for heavy engine rooms and towers. With the MagnumForce Green, SpanSet is setting new standards in lifting technology in terms of safety and environmental awareness. Through the processing of bio-based fibers in the core, the heavy-duty round sling generates a significantly lower CO2 footprint. In addition, the MagnumForce Green optimally meets the diverse requirements of a wide range of industries and covers the entire spectrum of applications."     

Periodic inspection service on lifting or height safety tool according to different standards. NDT and load test also included. Cooperat with RFID database system, makes equipment managemnt much easier!   

Made of HMPE is simply pulled onto the sling and is placed against the sharp edge of the load to protect the sling.

Hose construction with the same high cut resistance all around allows a long service life due to the use of both sides and at the same time offers highest operational safety as misuse is excluded. The label sewn to the NoCut®sleeve with handling instructions and clear identification also contributes to this.

Designed with a fabric grooves on both sides. On the outside, the grooved construction increases the resistance to cuts and on the inside it facilitates the sliding of the sling in the sleeve, which makes it possible to turn and turn sharp-edged loads.

Available in lengths in 250 mm steps and widths from 55 mm to 315 mm.

The VGrind 360S – the new standard for the complete machining of solid carbide tools of up to 200 mm.
Ideal for applications in the areas of automotive manufacturing,
toolmaking, medical technology, precision engineering, aeronautical engineering and many more.
What sets this grinding machine apart is that it has more precision and power thanks to its innovative linear induction motor on the X, Y and Z axes.
This allows you to use the vertical multi-layer machining to bring all of the machine's assets to the fore – with magnets, without making contact and without wear.
This results not only in excellent performance, but also less maintenance required.
What you get: Optimal surface quality thanks to a five-axis grinding machine which impresses with every detail – from the operating concept to the intuitive software and clever automation solutions.

Do you want to grind carbide tools and erode PCD tools with high productivity? You can now do both, with more flexibility than ever before –in one machine.
The VHybrid 260 combines the strengths of an innovative grinding machine and a powerful erosion machine – and makes it possible to switch between both functions in next to no time. Finest, ultra-precise erosion pulses enable surfaces up to a roughness of 0.05 μRa, depending on the tool type.

TOOL
Outside diameter of up to 150 mm*
Tool length of up to 360 mm**

With a wheel measurement probe, glass scales and an intelligent cooling concept with a plate heat exchanger – the VGrind neon makes precision easy. Whether you producing a tool or carrying out resharpening service whenever it is required.

Same enclosure and same equipment – not quite! Everything the VGrind neon can do, the VGrind argon can do too – and a bit more. With a four-station grinding-wheel changer and an internal pallet loader, the VGrind argon offers increased comfort and flexibility for different batch sizes.

TOOL
Outside diameter of up to 200 mm*
Tool length of up to 360 mm**

The quick change system QuickFlex® for all popular CNC turning centers: to reduce the tool change time and to increase flexibility and productivity. Without making a compromise in precision and rigidity with only a minimum investment.

The new state of the art Broaching Unit from WTO for economic manufacturing of oriented keyways and splines.

High productive manufacturing of Gears with CNC turning centers.

The Gear Hobbing unit offers high stiffness and runout accuracy. High flexibility due to interchangeable milling arbors for different cutting tools.

Feature

• Attractive
• Slim
• Precise
• Robust
• Economical

Application

If features a sleek and attractive design. Its precision and versatility allow quick and easy determination of workpiece zero points and lengths. The probing can be performed in all axis directions (X/Y/Z) with identical resolution. As soon as the pointer shows  〞0 〞, the spindle axis stands precisely on the workpiece edge.

The protection of the measuring unit is of topmost priority. For this purpose, large travel paths, limited by mechanical stops, have been integrated into the probing unit. The probing unit tip has a breaking point that is mounted near the top. If your 3D probes are damaged by the effect of an external force, a simple repair is economically possible.

WP200 Workpiece probe

• Probing and measuring of your workpieces
• Radio signal connection
• Probing accuracy +/- 0.003mm
• Fully automatic, directly on your machine

TP125/TP135 Tool probe

• Probing and measuring of tool lengths
• Radio connection/connection cable
• Probing accuracy +/- 0.003mm
• Fully automatic, directly on your machine

RC100 Receiver

• Green = activated
• Blue = connected
• Red = probing signal

How to work with the 3D Tester Digital :

Clamp the 3D Tester into your tool holder, adjust the run-out and there you go

Rough scale (1.5 till 0.25mm)
Fast approach and safe probing thanks to the analogue rough display. The eye can easily follow the progress as the black bar decreases clockwise.

Fine scale (0.25 till 0mm)
At -0.25mm, the display changes to the fine scale and the green LED lights up.

Zero point (precisely reached)
When the 〞0〞is reached, the spindle axis is positioned precisely on the edge of the workpiece.

Danger of crash
(0mm till ERR01)
When overpassing, the LED warns in red and the black bar builds up clockwise to the right. Shortly before crash (>1mm), you can see ERR01 on the display.